You are here: Home>Products>Folding door intro >Folding doors > FTL
|
You are here: Home>Products>Folding door intro >Folding doors > FTL |
|
|
For internal and external use our folding doors are a very stable and functional industrial door. They range from light weight to heavy duty with either flexible or rigid door panels. Generally applied in industrial and commercial buildings automatic operation of the door is desirable in intensive traffic situations or in cases where the vehicle and/or load may not come into contact with the door. Please view our three models to see which meets your specification. |
|
|
|
FTL The light weight folding door type FTL with flexible door panels and pneumatic operation. The door opens 90 degrees in one direction. It is a very stable and functional industrial door for use in extremely heavy conditions and generally applied in industrial and commercial buildings. Automatic operation of the door is desirable in intensive traffic situations or in cases where the vehicle and or load may not come into contact with the door, Specification/construction The FTL pneumatic folding door consists of one or two door leaves, a stable upper beam with double-action compressed air cylinder (s) and the control box. The door leaves are built up of a vertical clamping profile and a horizontal folding arm. The PVC door leaf is made of 7mm transparent PVC sheet, divided into two halves which are attached together over the full height of the panel by means of a flexible hinge section. The door panel is attached to the main construction by clamping strips. The folding arm of the door construction hangs from the guide track of the upper beam via a sliding trolley. |
|
|
|
|
Materials The door frame and upper beam are made of steel. The door panel consists optionally of:
Finish The upper beam and all the door frame parts are finished in zinc epoxy..The clamping profiles are galvanised.
Dimensions Maximum door area approx.10m2 (based on an internal double door). Larger dimensions are possible subject to application conditions Click here to see specification sheet.
Operation The door is opened by means of compressed air cylinders mounted above the door opening
Controls
|
Operation In principle any form of actuator can be used. Standard actuators are : pull switch, key switch, push button, photocell, radar detector, induction loop detection or by remote control. Click here to see our range of control actuators. Safety As standard the door falls automatically open in the event of a power failure (other configurations are available). the door panel hinge sections clearly mark the door leaves in the closed position and the edge of the panels n the open position.
Technical specifications
Mounting structure requirements and connection Power supply (wall socket) and air supply (connection nipple with 1/2" internal diameter) must be present within 1 meter from the control box. The compressed air cylinder must be clean and dry.
Accessories / options
|
