You are here:Home>Products>Sectional doors intro>Sectional Doors >ISO Insulated Door

Jump to information on.... --------------------------------------------- Roller Shutters Fire Shutters Sectional Doors Steel Doors Speed Doors Automatic Gates Grilles PVC Strip curtains Folding Doors Flat sliders Crash doors Collapsible lattice gates Barrier Systems Vehicle Security Acoustic Doors Dock Shelters Dock Leveller Shutter Gates Insect screens ------------------------------------------------- Domestic Security ---------------------------------------------- Internal & external security doors Garage Doors Domestic roller shutters Window grilles and gates Automatic entrance gates Access control systems Bollards ---------------------------------------- Trade -------------------------------------------- Component Supply -------------------------------------------- Optional Extras Colour Range Gallery Enquiry form

ISO SECTIONAL OVERHEAD DOOR SUMMARY

Robust panels with excellent insulation properties. The insulation core consists of CFC-free high density polyurethane foam.The outer skins, made of 0.5 mm thick galvanised steel plate, are finished with a durable oven-cured acrylic coating. The thermal separation between the internal and external skins guarantees excellent insulation properties with a K value of 0,58 W/m2K. The ISO door also achieves noise reduction levels of 25 dB (experimental result under controlled circumstances) A clever tenor and groove system with a resilient seal at the panel joints in combination with effective seals all round the door perimeter keep wind and rain at bay.

 

ISO DOOR LEAF STANDARD SPECIFICATION
• Surface finish horizontal profiling on the inside and outside, smooth top skin inside and outside.
• Paint RAL 9002 inside and outside
• Door gear galvanised hinges and roller brackets, die-cast bottom consoles, rollers with ball bearings and galvanised shaft
• Sealing aluminium panel end caps, aluminium top and bottom edge profiles with permanently elastic rubber seals,lateral sealing also using permanently elastic rubber seals
• Operation pull cord on the inside
• Locking galvanised shoot boltThe ISO sectional insulated door, in manually operated and electrically operated versions. These doors are used in private sector and in industrial and commercial buildings. There is a choice of various specifications, finishes, operating methods and track arrangements

ISO PANEL CONSTRUCTION

The panels are high density foam insulated, sandwich elements. The inner and outer skins are made of steel plate, which has been coil-galvanised on each side. The zink coating specification is 275 gr/m2. The external coating of each skin is 25 µm and is applied using a double coat spray system.

The tongue and groove system at the top and bottom panel joint ensures good sealing between the sections. The inner and outer skins are thermally separated in order to maintain the good insulation characteristics of the PU rigid foam panel core.

PANEL SELECTION

FINISHES

VISION PANELS

WICKET DOORS - UNDER RECONSTRUCTION

VISULAISATIONS - UNDER RECONSTRUCTION

TRACK CONFUGURATIONS - UNDER RECONSTRUCTION